Product ID:236B3501,BAR RUST 236 MULTI PURPOSE EPOXY (
MSDS Date:02/25/1991
FSC:8010
NIIN:00N033229
MSDS Number: BPQDT

DEVOE COATINGS CO

4000 DUPONT CIRCLE
LOUISVILLE, KY 40207
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 502-897-9861

Cage: 1HK86

DEVOE COATINGS CO

7600 LOUISVILLE, KY 40207-4802 US

Telephone: 502-897-9861

Cage: 1HK86

BUILD-UP BY REMOVING HEAVY SOLVENT VAPS FROM LOWER

RTECS: 9999999ZZ

4.2.

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: <5%

OSHA PEL 100 PPM

ACGIH TLV: S, C 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

(ORAL, RAT)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 15%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

VOLATILE ORGANIC COMPOUNDS (183.22 GM/L)

RTECS: 9999999VO

MAY CAUSE A HLTH HAZ. SYMPS MAY NOT BE

RTECS: 9999999ZZ

CONSULT MD IMMED.DO NOT INDUCE

RTECS: 9999999ZZ

INTENTIONAL MISUSE BY DELIB

RTECS: 9999999ZZ

NON-SPARKING TOOLS.STORE IN CLOSED CONTAINER

RTECS: 9999999ZZ

2 COMPONENT PROD, THEN MIX OF BASE & CONVERTER

RTECS: 9999999ZZ

PROD MAY CONTAIN CHEM KNOWN

RTECS: 9999999ZZ

REPRODUCTIVE HARM (PROPOSITION 65). DO NOT GET ON

RTECS: 9999999ZZ

RESTRICTED VENT AREAS, WEAR NIOSH/MSHA APPRVD

RTECS: 9999999ZZ

PARTICULATES AND VAP. WHEN USED IN CONFINED AREAS,

RTECS: 9999999ZZ

NIOSH/MSHA APPROVED RESPIRATOR WHEN FLAME CUTTING,

RTECS: 9999999ZZ

HLTH STANDARDS IN MIXING, APPLICATION & CURING AREAS &

RTECS: 9999999ZZ

PRODS DURING WELDING & FLAME CUTTING ON SURFS COATED

RTECS: 9999999ZZ

SILICA, CRYSTALLINE - QUARTZ; (CRYSTALLINE SILICA)

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 20%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

(ORAL, RAT) >5000 MG/KG.

CAS: 25068-38-6

RTECS: KC2100000

Fraction By Weight: 30%

NAPHTHA, LIGHT AROMATIC; (HIGH FLASH AROMATIC NAPHTHA). VP

CAS: 64742-95-6

Fraction By Weight: 5%

OSHA PEL 100 PPM (MFR)

TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (MAGNESIUM

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 20%

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST

MICA

CAS: 12001-26-2

RTECS: VV8760000

Fraction By Weight: 5.0%

OSHA PEL 20 MPPCF

ACGIH TLV: 3 MG/M3 RDUST; 9293

LD50 LC50 Mixture:SEE INGREDIENTS
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:IRRIT OF RESP TRACT; HDCH,
NAUS, DIZZ, WEAKNESS & FATIGUE. EXTREME EXPOS CAN RSLT IN UNCON &
EVEN RESP ARREST. SKIN/EYE:CAUSES IRRIT. MAY BE HARMFUL IF ABSORBED
THRU SKIN. INGEST: CAN CAUS E STOM &/INTESTINAL IRRIT, NAUS, VOMIT
& DIARR. CHRONIC: REPORTS HAVE ASSOCD RPTD & PRLNGD OCCUP (EFTS OF
OVEREXPOS)
Explanation of Carcinogenicity:SILICA, CRYSTALLINE (QUARTZ): GROUP 2A
(IARC), ANTICIPATED TO BE A CARCINOGEN (NTP).
Effects of Overexposure:HLTH HAZ: OVEREXPOS TO SOLVS WITH PERMANENT
BRAIN AND NERVOUS SYSTEM DAMAGE. PROLONGED OR REPEATED BREATHING OF
SPRAY MIST AND/OR SANDING DUST OVER A PERIOD OF YEARS MAY CAUSE
DUST DISEASE OF THE LUNG S. CONTAINS CRYSTALLINE SILICA WHICH CAN
CAUSE LUNG DAMAGE AND CANCER. RISK DEPENDS ON DURATION & LEVEL OF
EXPOSURE.
Medical Cond Aggravated by Exposure:NONE, WHEN USED I/A/W SAFE HANDLING
AND USE INFORMATION.

First Aid:INHAL:IF YOU EXPERIENCE DFCLTY IN BRTHG, LEAVE AREA TO OBTAIN
FRESH AIR.IF CONTINUED DFCLTY IS EXPERIENCED, SUMMON MED ASSISTANCE
IMMED.IF BRTHG STOPPED, RESTORE USING APPRVD CPR TECHNIQUES &
SUMMON M ED HELP IMMED. EYES:FLUSH IMMED W/LG AMTS OF WATER FOR @
LST 15 MIN. GET MED ASSISTANCE. SKIN:WASH AFFECTED AREAS W/SOAP &
WATER. REMOVE SOILED CLTHG.GET MED ASSISTANCE IF IRRIT PERSISTS.
(ING 10)

Flash Point Method:SCC
Flash Point:100F,38C
Lower Limits:1%
Extinguishing Media:IN CASE OF FIRE USE CO*2 DRY CHEMICAL, FOAM OR
OTHER NFPA APPROVED METHOD FOR TREATING A CLASS B FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
.SUMMON PROFESSIONAL FIREFIGHTERS. WATER SPRAY MAY BE INEFTIVE. IF
WATER IS USED, FOG NOZ PREF. (SUPP DATA)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD.ISOLATE FROM
HEAT, ELEC EQUIP, SPKS & FLAME.DUE TO PRESS BUILD-UP, CLSD CNTNRS
EXPOS TO EXTREME HEAT MAY EXPLODE.NEVER USE (SUPP DATA)

Spill Release Procedures:REMOVE ALL SOURCES OF IGNIT (FLAMES, HOT SURFS
& ELEC, STATIC/FRICTIONAL SPKS).PVNT BRTHG VAPS.VENT AREA.BEFORE
ATTEMPTING CLEAN-UP, REFER TO HAZ CAUTION INFO IN OTHER SECTIONS OF
THIS MSDS.CONTAIN SP ILLED MATL & REMOVE W/INERT ABSORB & (ING 12)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE >120F/NEAR FIRE/OPEN
FLAME.KEEP AWAY FROM HEAT, SPKS & FLAMES.STORE LG QTYS IN BUILDINGS
TO COMPLY W/OSHA 1910.106.
Other Precautions:DO NOT SMOKE. PVNT BUILD-UP OF VAPS BY MAINTAINING
CONTINUOUS FLOW OF FRESH AIR.KEEP CNTNR CLSD WHEN NOT IN USE. DO
NOT TRANSFER CONTENTS TO BOTTLES/OTHER UNLABELLED CNTNRS. DO NOT
REUSE EMPTY CNTNRS. IF MATL IS PART OF A (ING 13)

Respiratory Protection:DO NOT BRTH VAPS, SPRAY MIST/SANDING DUST.WHEN
SPRAY APPLIED IN OUTDOOR/OPEN AREAS & DURING SANDING/GRINDING OPS,
USE NIOSH/MSHA APPRVD MECH FILTER RESP TO REMOVE SOLID AIRBORNE
PARTICLES OF OVERSPRAY & SANDING DUST. WHEN USED IN (ING 16)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP AIR CONTAMINANT CONC < CURRENT APPLIC SAFETY & (ING 19)
Protective Gloves:SOLVENT IMPERMEABLE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:SOLVENT IMPERMEABLE CLOTHING AND BOOTS TO
PREVENT SKIN CONTACT ARE RECOMMENDED.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO: COATING OFF WHITE BASE.FIRE FIGHT PROC:IF
EXPOS TO FIRE/EXTREME HEAT, WATER SHLD BE USED TO COOL CLSD CNTNRS
& PRVNT PRESS BUILD UP/POSS AUTO-IGNIT.EXPLO HAZ:A WELDING/CUTTI
NG TORCH ON/NEAR CNTNR (EVEN EMPTY) AS PROD/ITS RESIDUE MAY IGNIT.
DURING EMER CNDTNS OVEREXP TO DECOMP PRODS (ING 9)

Boiling Pt:B.P. Text:>244F,>118C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:1.7
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:21.43

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY CAUSE TOXIC FUMES WHEN HEATED TO
DECOMPOSITION. FUMES MAY CONTAIN CO, CO*2.

Waste Disposal Methods:DISPOSE OF I/A/W LOCAL, STATE AND FEDERAL
REGULATIONS. INCINERATE ONLY IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.